Main start point  is => MarkaSteel MG        The Alternate to Porcelain Steel           
24 gauge final thickness of .024 +-.002

Pricing below all includes protective Film applied over surface..........

Key Benefits

• Available in 24 gauge only .....  other gauges must be ordered in 40,000# lots
• In use by major manufacturers as a cost effective alternate to ceramic & porcelain steel boards
• back side has a rust preventative coating
• very good erasability with current version
• 2 years of field testing with no failures
• 2T or better bend radius.     Can even take a very small amount of drawing
• pieces can be sheared to custom size - call for pricing -----
• Marker Characteristics:  excellent for Dry erase, Wet Erase and  a high Permanent Marker resistance
• alcohol and Expo cleaner are recommended 
• this material is die sublimatable - we can print on it in full color!
• Technical: Roll coated on Coil Thermal Cured Polyester Based .0005" clear coat with marker characteristics all the way thru.  (there is no thin surface enhancer (such as wax or temporary surface coating to quickly wear away).   Clear coat  is appliance grade for both hardness, scratch resistance and durability.    Clear coat is over a white base coat.
• Gloss is 85-92 at 60 degrees by instruments but is subjectively less due to 55 gloss basecoat
• FOB Midwest or SC
• approximately 1 pound per sq ftback to MarkaRace
• This is a high volume product with best pricing only available in certain standard sizes or in large cut lots based on 350 sheets

Pricing  Retail => subject to volume and dealer discounts    see pricing
base price standard large lots is $2.36 ft2

back to MarkaRace